Jack Dunigan, 5X7JD, is my first guest blogger. He is the Senior Management Leader of Aidchild, Inc., a project providing a home for orphans living with AIDS in Uganda. His ham radio blog is called Ham Radio Safari. Thanks, Jack!
I came to Uganda in October from the the U.S. Virgin Islands in the Caribbean where I had earned callsign NP2OR, a U.S. General Class amateur radio license. I made a pre-move trip here in June and began the license process then, filing application and associated paperwork then. It turned out to be a waste of time. When I moved here in October, I checked with the Uganda Communications Commission with whom I had filed and discovered they had lost the paperwork. “Would I mind starting over?”
Well, I didn’t really have any choice and sharp rebukes at those personnel who might have mislaid the application would have only delayed everything. So, I began again. I had to write a cover letter, which must contain the over-the-top courtesies and deferential language most Americans find artificially sweet and out of place in business correspondence. Nonetheless, its goes a long way here to recognize the authority and position of the officers who will expedite your application. They also asked for specifics of the radio gear. So I provided make and model info, a description of the antenna, and the power output requested.
The most difficult part was the requirement to supply geographic coordinates. I had no idea what they might be. I knew I could find it on the Internet, but Internet access is so excruciatingly slow it seemed a daunting task.
No one I could find had GPS and I am doubtful anything other than a very sophisticated sytem will work here anyway. So I logged on and began the search. It was actually harder than I thought. Were I in the U.S. or Europe, I could have nailed it down in a hurry. But Africa is tougher. After some searching I found a website that specified the coordinates for Masaka, the city where I live. It wasn’t precisely on the dot where the station would be but here in Uganda, close enough is close enough. So I wrote them in, filled in the other details, and took in all the paperwork.
The clerk who helped me was very efficient and friendly. He shot a photocopy of my U.S. license and asked what callsign I would like. This took me by surprise. He suggested I could have my initials to which I readily agreed. He told me there would have to be a site inspection of the radio shack and antenna installation. I didn’t actually have the antenna up yet, but figured I could do so before the inspector arrived. I left the paperwork there, and hoped for the best. I hoped I could get a license within a month.
Three days later I was in the car on my way out of Kampala, the capital city, driving back to Masaka when my mobile phone rang. The young lady on the line told me I could come in and pick up my license. I wondered about the site inspection, which had not happened, but did not ask. Its better not to confuse things with procedures. I was a licensed Uganda Amatuer Radio operator—callsign 5X7JD!
The promised inspector has never showed up and it is extremely unlikely one ever will. I guess because Masaka is 125 kilometers from the Communications Commission office and no one has a car. The license fee is $63 USD a year so there’s not enough money in that for the commission to pay for transport to the site, so they just won’t bother.
There was one apparent complication with the license. When I received it, there was a specification that I was authorized to use code only. I must confess I do not know Morse code. My license in the States came after the code requirement was dropped and I did not, have not learned it. So, we made another trip to the Commission office to see if it could be changed. I discovered that no one there—not even the Chief Commissioner himself—had any idea that the designation they had entered into my license limited me to code transmissions.
In fact, they weren’t familiar with the idea of emission types. It became a delight to educate those in the office, and they have asked me to return and conduct a seminar for the staff on amateur radio! I will be going to the office this week to set it up. I would like to teach more Ugandans about amateur radio. I have already started corresponding with a local engineering student who saw my blog and has asked for help. I am pleased to offer it. We are all Elmers as we are being Elmered.
Joseph Kitiibwa says
Thanks for your work,
I am Joseph and would you help me to find more information on how to start low power FM station in Uganda.
I am a ugandan but however I ask semms not to be co- operative.
hope to hear from you.
Joseph
Dan KB6NU says
Hi, Joseph. I don’t really know the legalities of setting up a low-power FM station in Uganda, but you should be able to find all the technical information that you need to know on the Net.
sejjuko says
Hi Dan
is your friend , Jack Dunigan, 5X7JD, still in Uganda ? I would love him to hear and connect to with Him neverless .
Dan KB6NU says
I haven’t hear from Jack for quite a while. Sorry.
Bwambale Nicholas says
Joseph its good you have tried it before me, am on my run of stating my low power radio of atleast 30 watts, but am confused by two things, 1. Purchasing my transmitter and antena as there is no shops for such in uganda, i then searched on net and came across hlly products who promised i can recieve my transmitter thruogh DHL but i feel am not conviced becouse these are things i have never about from even anaibour, how safe can my money be? , do you know in uganda where they sale such stuff? 2. How much can i be paying as lincese with my 30 watts radio per year, what other legal document do i need after acquirering the ucc lincese? Please help, this was my this year’s resolution
Bwambale Nicholas says
please help am sorry for using that man’s name other wise am writing to you the owner of the blog, please help!
sam Galiwango says
Hello i currently own a radio streaming on the internet, i would like to set up a LPF in Mukono but i do not know the procedures / legalities in seting it up,
I have the transmitter and it can broadcast in a radius of 45 km.
Let me know how to start it up
Thanx for your assistance
Parth says
Thank you for sharing your story.
I would like to know about how to get the required hardware in Uganda. Did you bought them from here or you imported them from somewhere. We are looking to open an FM station here in Kampala and would like to first get the necessary things before we start.
Regards,
Parth.
Michael says
Does anyone know where to take a Ham radio course in Uganda?
Antonio, KG7YTS says
I have a friend who is going to Uganda as a missionary, should he get a U.S. license before he goes over there, or should he just wait and get just the Uganda one.
Dan KB6NU says
I would suggest that he get a U.S. license before he goes over there. With that in his pocket, he’ll be in a better position to acquire a Ugandan license.
David Graf says
Antonio, KG7YTS….please contact me via fb msg.
Rajesh.P says
Does any one know HAM radio course /club in Uganda
Sejjuko says
Hi Rajesh , Did you find any clubs in Uganda ?
Marco Antonio Reyes says
Hello
I read your blog. Thanks for sharing. I am a radio amateur from Mexico (still trying to get my license at home..) and currently having some vacations in Kampala for one month. Do radio amateur communicate in UHF/ VHF in Uganda or mostly use HF? Best regards DX
Marco
Ochan Hannington says
Were you able to work something out with the officers as far as establishing HAM radio is concerned?
I ask because I envision helping groups of local youth on this path.
vishal shah says
hi Jack. thanks for the lovely article. i have a bought in a few Baofeng 82 radios. wanted to learn from you if you are in town on how to setup multiple channels and listen in to all the 3-4 channels on one frequecy.