My Dayton experience started at 3:45 am Thursday morning. That’s when I had to get up so that I could make it to the Fairborn Holiday Inn in time for the first session of this year’s Four Days in May (FDIM). FDIM is a one-day conference put on by the QRP Amateur Radio Club International and is a great way to start the “Dayton experience.”
There were somewhere between 300 and 400 attendees at this year’s event, and we were treated to six very fine presentations. They included talks on using microcontrollers for various projects, software-defined radio, VHF and UHF for QRPers, homebrewing with “hollow state” devices (more commonly known as tubes), using open-source electronic design tools, and operating pedestrian mobile. The two talks that I enjoyed the most were “Hollow State (Thermatron) Homebrewing” by Grayson, TA2ZGE/KJ7UM and “Leveraging Free and Open Source Tools in Homebrewing” by Jason, NT7S.
Two things about TA2ZGE’s talk stood out for me. First, was his method for homebrewing tube circuits. What he does is to take a Dremel tool and create pads on a bare piece of circuit board material, including pads that you can solder a tube socket to. Using this breadboard, you can create prototypes “Manhattan” style. Second, was the list of online resources. I’ll post those in another blog post. Grayson’s talk has certainly given me the incentive to use those “tubs of tubes” as I’ve been threatening to do now for several years.
Jason’s talk was about how he used open-source design tools to create his latest kit, the OpenBeacon, a crystal-controlled QRPp beacon transmitter. There are more out there than I realized. I’m thinking of asking Jason if he would be interested in expanding his paper into a small book that I could publish for him.
Thursday evening, they had their normal show and tell and vendor night. At this event, those selling kits and keys set up shop in the ballroom. Jason was selling his kits and the Four States QRP club had some of their kits there, too. I don’t know how much, if anything, they charge the vendors, but perhaps next year, I’ll take some of my books. They’re not exactly the right audience for them, but perhaps they’ll buy them for friends and family.
Friday morning, I got up early again, so that I could make the 7:30am bus to the Hamvention. We arrived about 8:00 am, just as the gates were opening. The first thing that I did was to head to the FAR Circuits tent, which is–as the name implies–at the far end of the flea market. There, I made my first purchases, a board to make a regenerative receiver and one to make an audio breakout box.
The rest of the day was a combination of wandering the aisles of the flea market, fighting the crowds inside the arena, attending the odd seminar, and meeting people that I know. One of the guys I ran into was Dennis, KT8K. He asked me what I thought was this year’s flea market “theme.” Every year, he says, there is always an abundance of one type of equipment or model of radio.
He’s right, too. One year, for example, I saw a dozen or more Icom IC-735s. This year, I saw none. Oddly enough, this year I saw a lot of Swan transceivers and DX-60 transmitters. There were also lots of more modern transceivers for sale, too. I even saw a K3 for sale, although by the time I got to it, it had been sold.
Another fellow that I ran into was Ed, N4EDT. I probably wouldn’t have stopped to speak to him, but he was wearing a shirt with the Rotarians on Amateur Radio (ROAR) logo on it. I introduced myself to him, and we had an interesting discussion about what kind of service project that ROAR might want to start. Since he is the Assistant Director for Education for the ARRL’s Southeastern Division, he was advocating a local project. I, on the other hand, still favor an international project that would promote amateur radio in a developing country. We also talked about possibly having a ROAR booth at Dayton next year.
By the time, 4:30 pm rolled around, I was pretty hot and tired. Temperatures topped 80 degrees, and on the blacktop surface of the flea market, temperatures were undoubtedly higher. I was happy to get on the bus and head back to the hotel.
Saturday, was pretty much the same story, except it was even hotter. The temperature almost hit 90 degrees. I didn’t bring any sunscreen, either, so I got a little rosy.
I ran into some people that I knew that had just come down for the day, or perhaps that I’d missed the day before. One guy I ran into at the Ohio Repeater Council booth, pulled out his new Elecraft KX-3 and gave me a quick demo. It’s actually quite a cool, little radio. I’m still saving up for a K-3, though.
One forum that I attended on Saturday was the Drake forum. The room was packed with people still keeping alive their old Drake equipment. The reason that I attended was I have a friend who recently was given some Drake C-Line equipment. He wants to find a good home for them. After attending this forum, I’m now thinking about buying it from him and using them in my station. I know that if I ever have any trouble, I’ll have plenty of guys out there who can help me.
After the Drake forum, I went to the food court for a slice of pizza and a glass of beer. Seating is catch as catch can, so I shared a table with several other hams. This is great because you get to meet all kinds of different people.
This year, an older gentleman sat down next to me with his beer. We got to chatting, and as it turned out, this was his 55th straight year attending the Dayton Hamvention! He started going before it was even held at Hara Arena, and even after they moved to Hara, they didn’t use the entire facility as they do now. I’m really glad that I got to speak with him.
So, what did you buy?
I didn’t really go down to Dayton with much of a shopping list. My short list included more PowerPole connectors, the circuits boards I mentioned earlier, and I was going to buy a mic boom for WA2HOM. I got the connectors and circuit boards, but decided against the boom.
I did pick up a bunch of other little stuff including some strain reliefs, more clamp-on ferrite cores, a paddle pad from Vibroplex ($1) to keep the paddle down at the museum from sliding around, and some tube sockets! One of the vendors there had a box of tube sockets that they were selling for a quarter apiece or five for a dollar. I picked out five and paid the lady, and as I was walking away, I decided that they were such a good deal that I went back and bought five more.
My biggest purchase was NT7S’s OpenBeacon QRSS transmitter. It cost me $40. It looks like a very nice kit, and I’m hoping to be on 30m QRSS shortly with it. The nice thing about this transmitter is that it has a microcontroller that lets it transmit DFCW and Hellschreiber, in addition to CW. It should be fun to both build and operate.
I almost bought a K3. I stopped by the Elecraft booth and picked up an order sheet, but decided against it. If they had been offering more than a $50 show discount (<2%), I might have gone for it, but that just wasn’t enough incentive.
Too rich for my blood
In other news, both Kenwood and FlexRadio both introduced new radios at Dayton. Perhaps the most buzz was around the Kenwood TS-990. Of course, they didn’t really have a working model. There’s not even any information on the Kenwood USA website.
What they did have was a mockup under a Plexiglass cover. In addition to being incredibly expensive, the radio is huge! I heard someone joke that to produce this radio, Kenwood is going to have to corner the market on buttons and knobs. If you’ve seen the photo in QST (which was allegedly produced with Photoshop), you’ll know what I mean.
The other radio with a bit of buzz is the new FlexRadio FLEX-6000. For the past couple of weeks, the FlexRadio website was proclaiming that this radio was going to be a game changer. Perhaps it is, but at $6,000+, this radio is out of my league, and too expensive for the majority of radio amateurs. That being the case, I really don’t know what all the buzz is about.
I’m sure that the TS-990 and the FLEX-6000 are both great radios, but I think that the law of diminishing returns applies here. At some point, are you really getting $6,000 or $12,000 of fun out of the radio? I don’t think that I would.
Well, that’s it. Another Dayton Hamvention is in the bag. It was a lot of fun, and I’m already looking forward to next year. In addition to possibly participating with other Rotary Club members in a ROAR booth, I’m thinking about pushing for an adult education forum. I think that’s something that’s both needed and would be popular. I’ll just have to make sure to leave enough time to hit the flea market and grab some more tube sockets or coax or whatever.
ON5ZO says
You’re so right that a rig costing twice as much as a K3 absolutely does not offer twice the DX QSO. To me the K3 is the standard (I have two HI). Giant fancy rigs costing more are just a rip off. I always wonder what you could work with one of those that a K3 (or a similar model with equal price/quality ratio) wouldn’t bring to your log.
I just love that rig so much, and they do get a decent workout here! HI
Dave, N8SBE says
I saw a K2 in the flea market, but I’ve almost never seen Elecraft stuff at swaps. I think there are two reasons:
1) Folks are loath to part with any of it, and
2) The best place to sell Elecraft stuff is on the Elecraft mailing list. You seldom see items for sale there, but once posted, they are typically gone in a couple of hours, and the resale price is usually pretty high, compared to a lot of used gear prices of other equipment you normally see at swaps.
As far as Elecraft Dayton show specials, I believe this was the first year they offered any discount on show orders. In the past they have only given free shipping (which can be significant for a large or heavy kit like a K3 or KPA500). I think they decided to offer the $50 K3 incentive this year based on feedback on the maiing list, when they asked what, if any, incentives that folks thought might sweeten the Dayton sales experience. The caps, I believe, were also from that conversation, as I pointed out that I appreciated getting the K3 T-shirt the year I ordered my K3, and they had not had free wearables for orders since then.
Scott W1BIC says
Dan,
Thanks for taking the time to write about your experiences! I would be very interested in attending the FDIM conference with you next year.
Shebnik says
$6000 – why not? People are buying Leica M9 for $7000 – rangefinder body without AF. Costs more than professional weather-sealed heavy duty Nikon D4 – and they still buy it. For casual street shooting.
So… I don’t see why computer geek would not get SDR transceiver for $6k
Dan KB6NU says
There will always be a market for high-end stuff like that. I’m not arguing that point. I’m just saying that I would rather spend less on a radio and more on other things in life, and I think that’s probably true of most hams. That being the case, I don’t get why everyone seems so excited about these new radios.