• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

KB6NU's Ham Radio Blog

KB6NU's Ham Radio Blog
  • HOME
  • Study Guides
  • Teach a One-Day Tech Class
  • W8SRC Repeater Guide
  • Advertise
  • Hire Me

sBITX

Do these radios make ham radio better?

September 11, 2024 By Dan KB6NU 10 Comments

Three new radios were introduced last month at this year’s Japan Amateur Radio Leage (JARL) Ham Fair, including:

  • the Icom IC-7760
  • the Yaesu FTX-1F
  • a new mobile VHF/UHF transceiver from Kenwood

Icom IC-7760

Icom tried to get hams talking about the new IC-7760 by displaying a bunch of prototype board under a plexiglass case at the Dayton Hamvention. It generated some buzz, but in general, most hams here in the U.S. took a wait-and-see attitude.

When it was finally unveiled, many were disappointed, mostly because of the price, I think. DXZone reported that “the initial price in Yen was approximately $6000 or 5400 €. Just a few weeks later, European dealers began publishing the official IC-7760 price at around 6650 €, significantly higher than the original estimate.” None of the U.S. dealers has published a price for the radio yet.

The radio does have some interesting features, including:

  • 200 W output
  • Separable control head and RF deck
  • In-house remote operation through a wired LAN
  • Two displays, 7-inch wide and 2.4-inch

The question is whether theses features justify the high price. Members of the IC-7610 mailing list don’t seem to think so. One of them noted, “I think the biggest competition to the 7760 will be the 7610, at nearly half the price and with very similar features, my guess is that few will opt for a 7760 unless they ‘just have to have one….'”

Yaesu FTX-1F

The FTX-1F is Yaesu’s replacement for the very popular FT-817/818. Its features include:

  • SSB, CW, AM, FM and C4FM digital modes
  • SDR technology and 3DSS (3-Dimensional Spectrum Stream) on a 4.3-inch high-resolution full-color touch display panel
  • Two independent receivers for true simultaneous dual-band operation, whether in the same band or in different bands.
  • USB ports support CAT operation, audio input/output and TX control
  • 9 hours battery life on HF bands, 8 hours on V/UHF bands

Like the IC-7760, it’s not currently available from U.S. dealers, so the pricing isn’t set yet, but the word is that it’s going to cost around $2,000 when it’s finally released sometime in 2025. That’s quite a bit higher than the price of the FT-817/818, but it does have more features, and presumably, better performance.

Like the IC-7760, the question is whether these features justify the higher price. There are lots of interesting comments about this on qrper.com.

Kenwood mobile transceiver

The last announcement from the JARL Ham Fair is a new mobile radio from Kenwood. Details on this radio are sketchier than for the other two, but hamlife.jp reports the following:

  • Compatible with D-STAR and APRS. 
  • Separate controlunit and RF deck.
  • Built-in GPS receiver
  • USB ports on both the control panel and the radio body.
  • Currently developing it for release in 2025.

They also report that, “Price is expected to be higher than the TH-D75.” That puts the price north of $750.


The question that I have with regard to these new radios is are they making ham radio better? This is only a partly-baked idea, but please stick with me on this. I can see where these new radios might make Icom, Yaesu, and Kenwood more money, but I don’t really think that they make ham radio better.

First, how many hams can actually afford a $6,000 radio? And of those, how many will actually buy one? I’d love to see Icom’s marketing study for the IC-7760. Same goes for the Yaesu FTX-1F and the yet-unnamed Kenwood radio.

Second, I teach a lot of ham classes, and work with a lot of new hams, so I have a particular point of view here. That being the case, I’m not so sure that I’d counsel a new ham to buy one of these three radios. These are not radios for people just getting started in the hobby.

I think that what we need are more radios like the HF Signals sBitx. The sBitx is a reasonably-priced radio that offers reasonable performance at a price that’s affordable. And, it’s hackable, too!  It’s not the perfect radio, but it’s certainly more accessible.

As I say, this is just a partly-baked idea, so I’d love to hear what you think. What features should a radio have to make the hobby better for all radio amateurs.

Filed Under: Gear/Gadgets Tagged With: FTX-1F, IC-7760, Icom, Kenwood, sBITX, Yaesu

Videos: An SDR BITX, CW tips from G4FON (SK)

August 12, 2021 By Dan KB6NU 1 Comment

Here’s another cool project from Farhan–an SDR BITX..

Ray, G4FON, passed recently. His CW Trainer is quite possibly the most popular CW training software of all time.

Filed Under: Building/Homebrew, CW Tagged With: G4FON, sBITX

Primary Sidebar

No Nonsense Technician Class License Study Guide (for tests given between July 2026 and June 2030)

New No Nonsense Technican Class Study Guide now available!

The 2026 version of my Tech Class study guide is now available, and as always, the PDF version is FREE!. The ePub version costs $11.97, and a Kindle version and paperback version will be available on Amazon shortly.

Click here to get all of my "No Nonsense" study guides.

Also available: The CW Geek's Guide to Having Fun with Morse Code

W5SWL.Com
Retevis Ailunce H1 DMR Radio
DXpander: Cobweb antennas, Laser Cutting

You’ve got mail!

Enter your email address below and get an email every time I publish a new post.

Email


I frequently teach classes to help newcomers get their licenses. The next class will take place on Saturday, October 10, 2026 on the University of Michigan campus. Click here for more information.

If you can't make the class, subscribe to the mailing list to be notified of when the next class will be held.

You can always download my free study guide, and if you have any questions about the classes, or amateur radio in general, please feel free to email me directly.

Support KB6NU.Com

Donate $7.30 and get two of these cool stickers. Measuring 4.25-in. W by 2.75-in. H, it's perfect for your car, your shack, or wherever!

Contact me

If you have a question or comment about one of my blog posts, or a question about any of the material in my study guides, or just a question about ham radio in general, you can email me at [email protected].

Blogs You Should Also Read

  • AE5X: A CW-centric blog from Kingswood, Texas
  • K0LWC Blog
  • LA3ZA Ham Radio Blog
  • Little Radios, Big Fun – WB3GCK
  • Mr. Vacuum Tube's Blog
  • Radio Artisan – K3NG
  • The K0NR Weblog
  • VE3WDM's QRP Ham Radio Blog
  • W2LJ’s Blog

Ham Radio Websites

  • Dashtoons – The Hammin' Comedy by Jeff K1NSS

Podcasts

  • ICQ Podcast
  • Linux in the Ham Schack
  • No Nonsense Amateur Radio Podcast
  • Resonant Frequency Amateur Radio Podcast

Recent Comments

  • Matt W1CDN on A completely different picture of Wayne Green, W2NSD (SK)
  • Chana Walsh on Rethinking ham radio education
  • Rob WfourZNG on Videos: What’s next for POTA, ham radio helps rescue man trapped in cave
  • Dan KB6NU on The EMF Explorer: A badge for ham radio?
  • Travis Good on The EMF Explorer: A badge for ham radio?

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Footer

Copyright © 2026 Daniel M. Romanchik, KB6NU · Log in