• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

KB6NU's Ham Radio Blog

KB6NU's Ham Radio Blog
  • HOME
  • Study Guides
  • Teach a One-Day Tech Class
  • W8SRC Repeater Guide
  • Advertise
  • Hire Me

Dayton Hamvention 2026: Day 1, Wednesday, May 13

May 18, 2026 By Dan KB6NU 2 Comments

Last Wednesday, I began my annual trek to the Dayton Hamvention. I live pretty close (three and a half hours driving), but I like to attend QRP-ARCI‘s Four Days in May on Thursday, so I head down early. I used to actually leave verrrry early on Thursday morning to get there by 8 am (and not have to pay for a night in a hotel), but I gave that up several years ago.

A couple of years ago, I started doing Parks on the Air (POTA), so I take the opportunity to stop at a couple of parks on the way. My first stop is Van Buren State Park, which is just north of Findlay. It’s right off the freeway (I-75) and very accessible. I arrived about 11:30 am.

Picnic shelter
This is the picnic shelter I use when I activate Van Buren State Park.

I set up in the picnic shelter (shown above) that’s near the entrance to the park. This was my third activation, and there’s never been anyone else using the shelter when I’ve operated from there. I set up my 66-ft. doublet at the far end of the shelter, by the trees.

That was my first mistake. I was in a bit of a hurry, since I wanted to get set up quickly, so that I could eat lunch while i was operating. In my haste, however, I didn’t anchor the mast very well, and it was very windy that morning. So, of course, the antenna blew over. Not only that, one leg of the antenna got caught in one of the trees that you can see in the picture. This particular tree sported some big thorns, which made disentangling the wire a bit of a challenge.

I did manage to get the antenna back in the air—and eat my lunch—but it was very chilly with the wind and all. I squeezed out 12 contacts in about 45 minutes, then decided to tear down and hit the road.

In 2024 and 2025, my next stop was Grand Lake St. Mary’s State Park near Celina, Ohio. It’s a lovely park, which oddly enough, has a small lighthouse on it. It’s more than 20 miles east of I-75, though, so I thought I’d try a different park this year for my second activation. That honor fell to Kiser Lake State Park.

Beautiful view of a lake.
It was kind of cloudy at Kiser Lake State Park when I got there.

Getting there was a bit of an adventure. Like many people, I use Google Maps for navigation. After leaving Van Buren State Park, I got back on I-75 for about 20 miles, at which point Google decided to direct me to the back roads. The closer I got to Kiser Lake State Park, the narrower the roads became. At one point, the road was so narrow that there wasn’t even a center line. The directions were true, though, and I arrived in good time.

It was still windy and chilly, though. I set up in a picnic shelter near the park entrance, making sure this time to securely anchor the mast. I was able to make 14 contacts in about 45 minutes, and then decided to call it quits.

The nice thing about operating from Kiser Lake State Park is that the route from there to Fairborn, where I was staying is short and takes the back roads, avoiding I-75. I got to the hotel in about 45 minutes. I headed over to the FDIM hotel, picked up my badge and then headed out to dinner. Overall, this was a great start to my Dayton 2026 adventure.

Related posts:

  1. Operating Notes: 40-meter DX, two Ohio POTA activations
  2. ICQPodcast at Dayton Hamvention
  3. Amateur radio in the news: Australian hams track fires, club doubles hamfest attendance, club awarded $1,000
  4. Experience Ham Radio World virtually this weekend

Filed Under: Hamfests, Parks on the Air Tagged With: Dayton 2026

Reader Interactions

Comments

  1. Randy Shake says

    May 19, 2026 at 8:00 am

    Thanks for another interesting blog update! I was also at FDIM this year and had planned to activate a few parks on the way back home to VA on Saturday, but it was an all day rain! Randy Shake – KC9LC.

    Reply
    • Dan KB6NU says

      May 19, 2026 at 8:25 am

      I could have stopped at several parks on the way home, but I’m so tired by that time, I just drive straight through to get home.

      Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

No Nonsense Technician Class License Study Guide (for tests given between July 2026 and June 2030)

New No Nonsense Technican Class Study Guide now available!

The 2026 version of my Tech Class study guide is now available, and as always, the PDF version is FREE!. The ePub version costs $9.97, and a Kindle version and paperback version will be available on Amazon shortly.

Click here to get all of my "No Nonsense" study guides.

Also available: The CW Geek's Guide to Having Fun with Morse Code

W5SWL.Com
Retevis Ailunce H1 DMR Radio
DXpander: Cobweb antennas, Laser Cutting

You’ve got mail!

Enter your email address below and get an email every time I publish a new post.

Email


I frequently teach classes to help newcomers get their licenses. The next class will take place on Saturday, February 7, 2026 on the University of Michigan campus. Click here for more information.

If you can't make the class, subscribe to the mailing list to be notified of when the next class will be held.

You can always download my free study guide, and if you have any questions about the classes, or amateur radio in general, please feel free to email me directly.

Support KB6NU.Com

Donate $7.30 and get two of these cool stickers. Measuring 4.25-in. W by 2.75-in. H, it's perfect for your car, your shack, or wherever!

Contact me

If you have a question or comment about one of my blog posts, or a question about any of the material in my study guides, or just a question about ham radio in general, you can email me at [email protected].

Blogs You Should Also Read

  • AE5X: A CW-centric blog from Kingswood, Texas
  • K0LWC Blog
  • LA3ZA Ham Radio Blog
  • Little Radios, Big Fun – WB3GCK
  • Mr. Vacuum Tube's Blog
  • Radio Artisan – K3NG
  • The K0NR Weblog
  • VE3WDM's QRP Ham Radio Blog
  • W2LJ’s Blog

Ham Radio Websites

  • Dashtoons – The Hammin' Comedy by Jeff K1NSS

Podcasts

  • ICQ Podcast
  • Linux in the Ham Schack
  • No Nonsense Amateur Radio Podcast
  • Resonant Frequency Amateur Radio Podcast

Recent Comments

  • Skip K4EAK on Button, button. Who’s got the button?
  • Ed K8MEJ on Is anyone running for the board this year in the Great Lakes Division?
  • Skip Behnke on 2020 Extra Class study guide: E9F – Transmission lines: characteristics of open and shorted feed lines; coax versus open-wire; velocity factor; electrical length; coaxial cable dielectrics
  • Mike on Map your contest QSOs
  • Phillip Cardwell on J-Poles

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Footer

Copyright © 2026 Daniel M. Romanchik, KB6NU · Log in